Residential Water Wells

What Does a Home Well Inspection Include?

By Penney Hoppe

Drilling a well for water supply is one of the concerns faced by the homeowner and home builders. This is because there are several considerations needed to ensure that you can have a good water quality for your home.

Prior to drilling a well, it is recommended that the water from the ground source be tested first to assure quality and safety of water. Aside from this, you also need to check the regulation of your area regarding the ownership of a private well.

Choosing the Site for Water Well

The performance and safety of your well will rely on your choice of its location. When inspecting different sites, you have to make sure that the possibility of having a future development plan in your property is considered. This is because once the well is drilled; you can longer make any development on that site.

Contaminants often enter the well on top of the casing or around it from the outside. Sewage and other contaminants could seep into the upper ground surface layers to the water table or aquifers.

The following factors can help to avoid the possible water contamination in your well.

  • The well should be accessible for monitoring, testing, cleaning, repair and maintenance.
  • The well location should be up-slope to prevent potential contaminants such as septic systems, from seeping into the aquifer.
  • The surrounding ground of the well is also sloped away to avert surface water runoff
  • The well should not be situated in a well pit.

Filtering Well Water

Well water, unlike city and municipal water, is drawn direct from the ground and does not pass through any filtration system before it can be consumed. Filters are not just used for removing viruses and bacteria from your well water supply, but also to trap the sediments which could be present in the water and pose a serious problem in your water source. When water is unfiltered, it can result to bad smell and taste.

There are several water filtration systems for well waters; however, if you want to get best results go for those that have multiple filters such as carbon filters. The system could be installed in several locations like at the pump itself, under the sink, at the entry point of water in your home, or in countertop. Doing a bit of research can help you in finding the right filtration system for your well water.

Anyone who has a well for his water supply should have a filtering system installed. This is to make sure that no harmful contaminant will infect the liquid. Water from well may contain pathogens that can trigger serious ailments.

You can have your well water periodically tested or just install a reliable filtration system to eliminate the harmful particles without removing the important minerals needed by the body. Installing water is a more economical option than having the water tested every now and then.

Benefits of Well Water

Health Benefits – well water can be filtered without the need of chemicals like chlorine. This will provide the health benefits without the added chemicals that can possibly harm the body.

Consumption and Taste – water from well is known to have softer taste compared to the city and municipal water. Unlike the water treated with chemicals, well water is softened naturally. Soft water from well can add to its refreshing taste.

Environment friendly – the filtration systems installed for well water are a lot more eco-friendly compared to the water treatment plants where the water supply for urban areas come from. Using well water reduces the use of pollution caused by chemicals and pollutants from treatment plants.

Financial Benefits – installing water well for your private use can make you eligible for various tax breaks, aside from being freed from water usage feed. Installing a well is also a long-term investment unlike when you rely on city water service wherein you will receive a monthly bill.

Article Source: http://EzineArticles.com/expert/Penney_Hoppe/1378802

http://EzineArticles.com/?Residential-Water-Wells&id=7312498

What Does a Home Well Inspection Include?

By Jill Smith

If you have a well, an annual well inspection should be part of your maintenance to-do list. Even if your water tastes good, lead and other contaminants can seep into the water supply and lead to health problems. A well inspection is a small price to pay to ensure the safety of your drinking water.

What Does a Well Inspection Include?

Conducted by a licensed and/or certified well water contractor, your annual well inspection should include several components:

  • A flow test to measure water output and level, pump performance, tank pressure and switch contact pressure,
  • An inspection of equipment to ensure that it meets local codes and appears to be safe,
  • A test of water for coliform bacteria and nitrates,
  • Tests for any minerals known to affect water conditions in the area, such as sulfides, manganese or iron,
  • Periodic tests for pH levels or total dissolved solids,
  • Additional tests if the water is cloudy or oily, if there are signs of bacterial growth on fixtures or if equipment is not working properly, and
  • A written report that includes laboratory data, explains results and offers recommendations.

Useful Information about Well Inspections

Once you receive the reports from your well inspection and from any other tests that were performed, you should retain the records and keep them in a safe place, along with construction documents from when the well was first dug. Most wells have a life expectancy of about 20 years or more. Having your records on hand will be useful in determining when you might need to replace it, and necessary if you sell your house.

How much can you expect to pay for a well inspection? The cost varies according to the area and is based on the sampling methods, test procedures and the number of tests performed, but a homeowner can generally plan on spending around $150-$350. More extensive sampling for more contaminants can raise the cost.

When choosing a well inspector, it is important to use one who is licensed and certified in your state and who is familiar with the local codes. The inspector should use laboratories that are licensed to test for various contaminants that may appear in the water.

Why Should You Order an Annual Well Inspection?

You may wonder why an annual well inspection is necessary if you have no problems with taste, appearance, odor or performance. Since your well is underground, you may be unaware of any possible changes. If your home is near farms, mines, a landfill or gas or oil fields, contaminants could infiltrate your water. The same is true if you have dumped oil or waste in your yard, had your home exterminated, have a septic tank problem or develop cracks in the sealed sanitary cap on your well.

Having an annual well inspection is the best way to assure the safety and quality of your water supply.

Jill Smith is a writer and researcher. She is the Director of Digital Content Marketing for Be Locally SEO where she enjoys helping clients expand and improve their businesses through articles, blogs, website content and more.

If you have a home, cabin or business well, see Mike Zimmerman Well Service for well inspections in northern Utah.

Article Source: http://EzineArticles.com/expert/Jill_Smith/1166588

http://EzineArticles.com/?What-Does-a-Home-Well-Inspection-Include?&id=8806475

Residential Water Wells, Water Treatment For Residential Areas

Residential Water Treatments – Well Water Frequently Asked Questions

Photo by Daniel Frank from Pexels