3 Signs It Might Be Time to Install a Water Filter

By Karina Popa

When water tastes bad and clothes are dingy, these may indicate that a home needs a filtration system. The following are the other signs to inspect alongside suggestions for water filters that can address the unfavorable effects caused by impurities.

Most homeowners believe that the water from their faucet is clean and safe however, this is not always the case. The truth is, tap water usually contains impurities even if it looks and tastes good. There are impurities that are harmless but others are dangerous and ruin water using appliances and fixtures.

Filtration requirements differ from one home to another, which depend on the type of contaminant present in the water and the way household members consume water. When the water is pure and there are only few fixtures utilized for human consumption, the affordable under-sink carbon filters would be an ideal choice. If the water has toxins or a high level of minerals, the house will be needing a filtration system, which is designed to treat water all through the house.

To know the water filtration needs of a household, they can review the scenarios that follow. If ever one of these looks similar to their water situation, both household and members could benefit from water filtration. Before purchasing a filtration system, a local provider should conduct a professional water test first.

Water tastes bad

Municipal water systems often do great in eliminating harmful toxins from tap water; however, in spite of their efforts, water in other communities does not taste good. There are certain areas in the country that tackle issues on taste, such as hard water. While water is healthy to drink, when it has high mineral content or has been chlorinated, it can have a bad taste.

One common reason why homeowners spend for a water filtration system is bad-tasting water.

Well water is their source

There are a number of private wells that give clean, healthy water. However, in the past decades, the extensive use of pesticides plus other chemicals has contaminated such wells in several states and regular carbon filters are not capable of removing the more dangerous toxins that may be in the water. Carbon filters can only be used for lighter-duty filtration of things such as lead and chlorine but to ensure elimination of heavy metals, nitrates and pesticides, a reverse osmosis (RO) system is required.

Clothes look dingy after washing

No matter what kind of detergent is used, it is almost impossible to let white clothes become whiter or colored clothes become brighter. Actually, the problem is not the washer or detergent but the composition of water that was used. Water that has high iron content can leave a rust looking stain in colored clothes and hard water can make clothes look dull and gray.

When newly washed clothes regularly show any of these two shades, an under-sink filter will not be sufficient. This will require a whole-house water treatment system in order to remove contaminants like iron, minerals and sediments, among others, that make clothes look dingy. This filter is installed on the main water supply pipe through which it enters the home. Since it filters the water in the whole household, aside from having cleaner, brighter clothes, people will enjoy drinking water that is tastier.

Do you need more information on water filtration? Are you looking for professional advice on water filters? Visit our website today and get in touch with us!

Article Source: https://EzineArticles.com/expert/Karina_Popa/1432444

http://EzineArticles.com/?3-Signs-It-Might-Be-Time-to-Install-a-Water-Filter&id=10393073

Top Well Water Problems

Common Issues and How to Solve Them

Top Well Water Problems
By Karina Popa

If there is a time that well waters fear is when the water that comes out from the tap has become discolored, cloudy or foul smelling. There must be something wrong with their well.

Luckily, there is a solution to most common well water problems. Well users just need to identify the cause of these water issues so they can take action and restore water supply immediately.

Common Issues and How to Solve Them

Hard Water

Hard water is caused by high levels of calcium and magnesium dissolved in the liquid. It is very common to find hard water in the US as it affects 85% of the people who live there.

Hard Water Symptoms

  • Clothes lose their original color and feel rough;
  • Skin is dry and hair is flakey;
  • Low pressure because of the buildup of minerals in clogged pipes;
  • Buildup of scale on faucets and appliances;
  • White residue and spots on dishes and dishwashers;
  • Stains on sinks and bathtubs.

Acidic Water Well Issues

Acid rain, drainage from mining operations as well as plant decay can lower the pH level to under 7.0 pH. Low well water pH level can also be caused by low total dissolved solids or TDS.

Acidic Water Symptoms

  • Blue-green color or rust stains in sinks and bathtubs
  • In some cases, cloudy water
  • Metallic, bitter taste
  • Small leaks in plumbing
  • Worn down faucets and fixtures
  • Hydrogen Sulfide

As organic material decomposes, the flammable hydrogen sulfide enters the water. The gas can be produced by the infestation of sulfate-reducing bacteria or chemical reactions with the anode rods inside water heaters.

Hydrogen Sulfide Symptoms

  • Rotten egg smell and taste of water;
  • Stains on clothes;
  • Stains on bathroom fixtures;
  • Discoloration of silverware, brass and copper;
  • Iron and Manganese.

Iron and manganese, which are naturally found in bedrock, can dissolve in groundwater when mining operations cause a disturbance.

Iron and Manganese Symptoms

  • Black stains or specks;
  • Orange, red or brown stains on sinks, bathtubs;
  • Cloudy, orange water;
  • Bitter, metallic taste;
  • Oily water surface;
  • Grey/black staining water;

Turbidity.

Drilling, runoff or other forms of earth disturbance can let high total suspended sediment levels enter well water. High levels of sediment may show the presence of pollutants, microbial life, or oxidised metals like iron and manganese in water.

Turbidity Symptoms

  • Dirty or cloudy water

Fluoride

Fluoride occurs in all natural water in a range of amounts and can be detected by testing well water. EPA recommends a 0.7 mg/L level for fluoride but it can be higher when it comes to well water

Fluoride Symptoms

  • Dental fluorosis: Brown or dirty white stains on teeth, children in particular.

Fecal Bacteria

Fecal bacteria like E. Coli is found in human or animal waste. These can find their way to well water by means of agricultural runoff, well wall cracks or overflowing sewage lines and septic tanks.

Fecal Bacteria Contamination Symptoms

Symptoms of Fecal Bacteria Contamination

  • Gastrointestinal illness happens more often
  • Water may/may not have an odor

Are you searching for a professional team to help you treat your well water Fort Worth? Do you need expert advice on the quality of drinking water Fort Worth? Visit the links and learn more about us!

Article Source: https://EzineArticles.com/expert/Karina_Popa/1432444

http://EzineArticles.com/?Top-Well-Water-Problems&id=10247126

Read More: Testing Your Water Well

Photo by Fikri Rasyid on Unsplash

The History of Water Purification Systems

Water can be purified in more ways than one. You may be wondering how water is cleaned.

By Arthur Huang

Water can be purified in more ways than one. You may be wondering how water is cleaned. Basically, water goes through a lot of stages before it is considered safer for regular consumption. According to the WHO reports, around 0.8 million people die each year from drinking contaminated water. These deaths could be prevented by providing clean drinking water. Read on to find out more.

In tap water, there is a lot of bacteria, algae, ions and chemical particles. Based on the consumption purpose, you can choose from different water purification methods. The infiltration process screens water for many particles, such as stones. They are removed during this stage.

The sedimentation process involves the use of a clarifier. The purpose of this process is to remove amorphous metal hydroxide. According to a study, if you remove essential minerals from your drinking water, you may suffer from urinary and digestive issues.

Sand filters are used for biological processes. Basically, this process involves the use of sand during the filtration process. After water passes through the sand filters, it becomes safe for everyone to drink.

Sand filters are quite popular as they help filter smallest elements. Therefore, they have been quite popular since 1800s. Over the years, researchers improved this method to ensure better results.

For water purification, the two common chemical processes are used. They are known as flocculation and chlorination. In these methods, chemical components are added to the dirty water to clear it from unwanted particles. They include inorganic particles as well.

Another most common method includes chlorine disinfection. However, the downside is that chlorine is not good for your health. Usually, chlorine is used in swimming pools. In 1854, cholera became epidemic in London. Then chlorine was used for water disinfection. It was used to disinfect the supply lines of water.

In 1879, another expert William Soper treated typhoid patients using chlorinated lime. Since there were a huge number of casualties, the technique of long-term water chlorination was used.

We don't use the old sand filters anymore. Today, we use chlorine of lime to put an end to this type of epidemics. As far as efficacy is concerned, this method is quite good. Plus, it's also quite safe for both you and your kids. However, the amount of chlorine in water should be less than 2 PPM.

In the US military, calcium hypochlorite is put in a Lister bag as an effective means of disinfecting drinking water.

Today, boiling water is still the common method to purify water. Home users are still following this practice in order to kill microorganisms found in water. All you need to do is wrap a used piece of rag around the water hose, and it will help you achieve the purpose.

In short, this was a description of some common methods of water disinfection. However, if you are looking for the best approach to ensure your drinking water is pure, you can use a water disinfectant machine. Another effective way is to use a reverse osmosis system.

A disinfectant water machine can be used in order to disinfect drinking water. You can check out these systems at https://www.olansi.net/disinfectant-water-machine-2/.

Article Source: https://EzineArticles.com/expert/Arthur_Huang/2682732

http://EzineArticles.com/?The-History-of-Water-Purification-Systems&id=10281967

Read More: Reasons to Purify the Tap Water

Image by Karolina Grabowska from Pixabay